| Customization: | Available |
|---|---|
| Type: | EP200 |
| Material: | Rubber |
|
Still deciding? Get samples of US$ 0/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hot transported material can very easily damage the conveyor belt, to prevent possible damage, special high-temperature resistance canvas with high modulus, low shrink, and high breaking tensile strength is adopted as carcass, and EPDM Rubber or Chloro butyl rubber by mixing some other high-temperature resistant materials and with advanced technique, the belt made better performance in heat resistance. That not only solves the fabric shrinkage and deformation problems but also avoids crucial poor adhesion problems caused by a high degree of saturation of ethylene propylene rubber The belt is excellent in heat resistance,low elongation light, and with longer use life, etc
Standards Offered:
DIN22102, RMA, AS1332, SABS 1173/2000, IS 1891, BS490, JIS K 6322, etc.
| Type | Textile type |
Strength per ply Min.(N/mm) |
Plies of fabric | Cover thickness(mm) | Belt width (mm) |
Cover grade | |
| Top cover | Bottom cover | ||||||
EP belt |
EP-100 | 100 | 2-8 |
2-16 |
0-10 |
300-3400 |
Abrasion resistant Impact resistant Heat resistant Oil resistant Acid/alkali resistant Fire resistant Etc. |
| EP-125 | 125 | ||||||
| EP-150 | 150 | ||||||
| EP-200 | 200 | ||||||
| EP-250 | 250 | ||||||
| EP-300 | 300 | ||||||
| EP-350 | 350 | ||||||
| EP-400 | 400 | ||||||
| EP-500 | 500 | ||||||
NN belt |
NN-100 | 100 | 2-10 |
||||
| NN-125 | 125 | ||||||
| NN-150 | 150 | ||||||
| NN-200 | 200 | ||||||
| NN-250 | 250 | ||||||
| NN-300 | 300 | ||||||
| NN-400 | 400 | ||||||
| NN-500 | 500 | ||||||
| CC belt | CC56 | 56 | 3-12 | ||||
Main technical indexes of GB / T 7984-2013
| Item | Type | ||||
| NN, EP,CC | |||||
| Adhesion strength | Between coating and belt cores | Thickness of coating layer>1.5mm ≥ N/mm |
3.5 | ||
| Thickness of coating layer 0.8~1.5mm More than N/mm |
3.2 | ||||
| Between layers ≥ N/mm | 4.5 | ||||
| Tensile strength value of full-thickness belt / N / mm | 160 ~ 3150 | ||||
| Elongation of longitudinal reference force of full thickness belt / % ≤ | 4 | ||||
Coating performance |
H (sharp wear) |
D (high wear) |
L (moderate wear) |
||
| Breaking strength / MPa ≥ | 24 | 18 | 15 | ||
| Elongation at break / % ≥ | 450 | 400 | 350 | ||
| Abrasion / mm3 ≤ |
120 | 100 | 200 | ||
| Aging test(70ºC×168h) The median value of tensile strength and elongation |
It shall not be less than 75% of the corresponding value before aging. |
||||
The rubber conveyor belts may generally be produced in 5 steps.
Mixing → Calendering →Laminating → Vulcanising - Inspecting/packing
1. The initial phase of the production process is to mix the rubber.
2. The calendering process mainly completes the fabric coating, cover sheeting, and bonding of the belt carcass and the covering sheet.
3. Laminating is the process of neatly adhering multiple layers of the belt together longitudinally, sticking edge rubber on both sides, and covering rubber on the top and bottom to make a belt blank.
4. Rubber vulcanization is one of the most important procedures in the processing of rubber conveyor belts, as well as the final step in the manufacturing process.
5. Testing before delivery.
Q1. Are you a manufacturer?
Yes, we have mainly produced rubber conveyor belts for over 18 years.
Q2. What are your main products?
Multi-ply fabric conveyor belts (EP/NN type), steel cord conveyor belts, chevron conveyor belts, sidewall belt, white conveyor belt, bucket elevator belt, filter belt, and special conveyor belts with the characteristics of heat-resistant, cold-resistant, oil-resistant, flame retardant, abrasion resistant, etc.
Q3. What about the lead time?
1) 3--5 days for sample.
2) 20--25 days for mass production. If urgent, we have the green channel.
Q4. Can you send free samples?
Yes, we provide samples for free after inquiry.
Q5. How about the package?
Standard export packing method, your special requirement will be respected.
Q6. What are your Payment terms?
T/T or L/C.
Q7. Can you do door-to-door?
No problem.
Q8. How do you ensure your product quality?
Our quality control system had been ISO9001 certified. The first-class production equipment, testing facilities, and a complete quality assurance system guarantee high quality.
Q9. What is your major market?
Our products are heavily involved in exporting all over the world, including Europe, America, the Middle East, Southeast Asia, South Africa, Australia, etc.
Q10. What you can do to support me better?
We can provide products that meet quality standards, timely delivery, transportation packaging requirements, and customers' other special requirements.
){kind=link}