| Customization: | Available |
|---|---|
| Type: | NN200 |
| Material: | Rubber |
|
Still deciding? Get samples of US$ 0/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Multi-ply Fabric(EP/NN/CC) Conveyor Belt
Product Classification
According to whether there is edge rubber: Molded edge belt and Cut edge belt.
According to the fabric type:
Polyester (EP) canvas conveyor belt (polyester belt, EP belt);
Nylon (NN) canvas conveyor belt (nylon belt, NN belt);
Cotton(CC) canvas conveyor belt(cotton belt, CC belt).
Product Use
It is widely used in coal, mining, port, metallurgy, electric power, chemical industry, casting, building materials, cement, and other industries and places that need high-speed transportation of materials, and it is used to transport non-corrosive block, granular, powder materials, bulk materials or finished articles.
Product Structure
The general-purpose fabric conveyor belt is made of multi-ply rubberized nylon (NN) canvas, polyester (EP) canvas, or cotton(CC) canvas as the skeleton material, covered with coating rubber with different properties, and manufactured through calendering, molding, vulcanization, and other processes.
Product Features
Nylon (NN) conveyor belt has the advantages of a light belt body, good elasticity, high strength, impact resistance, and grooving. It is suitable for conveying materials in medium and long distances, large volumes and at high speed.
Polyester (EP) conveyor belt has the advantages of high initial modulus, good thermal stability of belt body size, high strength, small elongation and impact resistance. It is suitable for conveying materials in medium and long distance, large volume and high speed.
Executive Standard
China GB/T7984 Standard
Germany DIN22102 Standard
US RMA Standard
UK EN ISO15236 Standard
Japan JISK6322 Standard
Australia AS1332 Standard
Main Technical Parameters
Type |
Textile type |
Strength per ply Min.(N/mm) |
Plies of fabric | Cover thickness(mm) | Belt width (mm) |
Cover grade | |
| Top cover | Bottom cover | ||||||
EP belt |
EP-100 | 100 | 2-8 | 2-16 | 0-10 | 300-3400 | Abrasion resistant Impact resistant Heat resistant Oil resistant Acid/alkali resistant Fire resistant Etc. |
| EP-125 | 125 | ||||||
| EP-150 | 150 | ||||||
| EP-200 | 200 | ||||||
| EP-250 | 250 | ||||||
| EP-300 | 300 | ||||||
| EP-350 | 350 | ||||||
| EP-400 | 400 | ||||||
| EP-500 | 500 | ||||||
NN belt |
NN-100 | 100 | 2-10 | ||||
| NN-125 | 125 | ||||||
| NN-150 | 150 | ||||||
| NN-200 | 200 | ||||||
| NN-250 | 250 | ||||||
| NN-300 | 300 | ||||||
| NN-400 | 400 | ||||||
| NN-500 | 500 | ||||||
| CC belt | CC56 | 56 | 3-12 | ||||
Main technical indexes of GB / T 7984-2013
| Item | Type | ||||
| NN, EP,CC | |||||
| Adhesion strength | Between coating and belt cores | Thickness of coating layer>1.5mm ≥ N/mm |
3.5 | ||
| Thickness of coating layer 0.8~1.5mm More than N/mm |
3.2 | ||||
| Between layers ≥ N/mm | 4.5 | ||||
| Tensile strength value of full thickness belt / N / mm | 160 ~ 3150 | ||||
| Elongation of longitudinal reference force of full thickness belt / % ≤ | 4 | ||||
Coating performance |
H (sharp wear) |
D (high wear) |
L (moderate wear) |
||
| Breaking strength / MPa ≥ | 24 | 18 | 15 | ||
| Elongation at break / % ≥ | 450 | 400 | 350 | ||
| Abrasion / mm3 ≤ |
120 | 100 | 200 | ||
| Aging test(70ºC×168h) Median value of tensile strength and elongation |
It shall not be less than 75% of the corresponding value before aging. |
||||
The rubber conveyor belts may generally be produced in 5 steps.
Mixing → Calendaring →Laminating → Vulcanising - Inspecting/packing
1. The initial phase of the production process is to mix the rubber.
2. The calendering process mainly completes the fabric coating, cover sheeting, and bonding of the belt carcass and the covering sheet.
3. Laminating is the process of neatly adhering multiple layers of the belt together longitudinally, sticking edge rubber on both sides, and covering rubber on the top and bottom to make a belt blank.
4. Rubber vulcanization is one of the most important procedures in the processing of rubber conveyor belts, as well as the final step in the manufacturing process.
5. Finished belt after testing.
Q1. Are you a manufacturer?
Yes, we have mainly produced rubber conveyor belts for over 18 years.
Q2. What are your main products?
Multi-ply fabric conveyor belts (EP/NN type), steel cord conveyor belts, chevron conveyor belts, sidewall belts, white conveyor belts, bucket elevator belts, filter belts, and special conveyor belts with the characteristics of heat-resistant, cold-resistant, oil-resistant, flame retardant, abrasion resistant, etc.
Q3. What about the lead time?
1) 3--5 days for sample.
2) 20--25 days for mass production. If urgent, we have the green channel.
Q4. Can you send free samples?
Yes, we provide samples for free after inquiry.
Q5. How about the package?
Standard export packing method, your special requirement will be respected.
Q6. What are your Payment terms?
T/T or L/C.
Q7. Can you do door-to-door?
No problem.
Q8. How do you ensure your product quality?
Our quality control system had been ISO9001 certified. The first-class production equipment, testing facilities, and a complete quality assurance system guarantee high quality.
Q9. What is your major market?
Our products are heavily involved in exporting all over the world, including Europe, America, the Middle East, Southeast Asia, South Africa, Australia, etc.
Q10. What you can do to support me better?
We can provide products that meet quality standards, timely delivery, transportation packaging requirements, and customers' other special requirements.
){kind=link}