Flat Tear Resistant Wire Rope Fabric Core Rubber Belt Bucket Conveyor Belt

Product Description

Detailed Photos

Product Parameters

Bucket Elevator Belt

 

Bucket elevator belts are typically made of fabric-reinforced rubber (EP, NN) or steel cord (ST) for heavy-duty applications. Common types include:
 

• Fabric Ply Belts (EP/NN) - General-purpose, moderate strength.

• Steel Cord Belts (ST) - High strength, used for heavy loads and long lifts.

• Heat-Resistant Belts - For high-temperature materials (e.g., cement, clinker).

• Oil-Resistant Belts - For handling oily or greasy materials.

Structure

The sophisticated structure of a bucket elevator rubber conveyor belt comprises a robust rubber belt coupled with buckets for material carriage. It integrates sprockets to facilitate belt movement, head and tail pulleys to guide direction and maintain tension, and a sturdy casing/frame providing essential support. A tensioning device ensures optimal belt tension while the drive system powers the elevator. Together, these components deliver seamless and dependable vertical transport for bulk materials.
Features

Bucket elevator rubber conveyor belts are crafted for durability, strength, and flexibility. They are resistant to temperature variations, corrosion, and abrasion, ensuring smooth operations with minimal maintenance. Customizable for varied materials, these belts guarantee safe and efficient handling, providing an economical solution for vertical material transport across a spectrum of industrial applications.

Parameter	Typical Range	Details
Belt Width (mm)	200-2000 mm	Common: 400, 500, 650, 800, 1000, 1200 mm
Ply Number	2-6 plies (EP/NN)	More plies = higher strength
Tensile Strength	200-3000 N/mm (ST belts up to 6000 N/mm)	Depends on material & reinforcement
Belt Thickness	8-20 mm	Thicker belts for heavy-duty use
Belt Speed	0.8-4.0 m/s	Faster speeds for light materials
Bucket Spacing	150-500 mm	Depends on bucket size & material flow
Operating Temp.             -20°C to +150°C (higher for special belts)

• Main Technical Parameters

Type	Textile type	Strength per ply Min.(N/mm)	Plies of fabric	Cover thickness(mm)		Belt width (mm)	Cover grade
				Top cover	Bottom cover
EP belt	EP-100	100	2-8	2-16	0-10	300-3400	Abrasion resistant Impact resistant Heat resistant Oil resistant Acid/alkali resistant Fire resistant Etc.
	EP-125	125
	EP-150	150
	EP-200	200
	EP-250	250
	EP-300	300
	EP-350	350
	EP-400	400
	EP-500	500
NN belt	NN-100	100	2-10
	NN-125	125
	NN-150	150
	NN-200	200
	NN-250	250
	NN-300	300
	NN-400	400
	NN-500	500
CC belt	CC56	56	3-12

Item			Type
			NN,EP,CC
Adhesion strength	Between coating and belt cores	Thickness of coating layer>1.5mm ≥ N/mm	3.5
		Thickness of coating layer 0.8~1.5mm More than N/mm	3.2
	Between layers  ≥ N/mm		4.5
Tensile strength value of full thickness belt / N / mm			160 ~ 3150
Elongation of longitudinal reference force of full thickness belt  /  %  ≤			4
Coating performance			H (sharp wear)	D (high wear)	L (moderate wear)
	Breaking strength   /  MPa ≥		24	18	15
	Elongation at break   /  %  ≥		450	400	350
	Abrasion         /  mm3  ≤		120	100	200
	Aging test(70ºC×168h) Median value of tensile strength and elongation		It shall not be less than 75% of the corresponding value before aging.

Production Process

Mixing → Calendaring →Laminating → Vulcanising - Inspecting/packing

1. The initial phase of the production process is to mix the rubber.
2. The calendering process mainly completes the fabric coating, cover sheeting, and bonding of the belt carcass and the covering sheet.
3. Laminating is the process of neatly adhering multiple layers of the belt together longitudinally, sticking edge rubber on both sides, and covering rubber on the top and bottom to make a belt blank.
4. Rubber vulcanization is one of the most important procedures in the processing of rubber conveyor belts, as well as the final step in the manufacturing process.
5. Testing the quality of the conveyor belt before delivery. And then delivery.

Company Profile

Research&Development Center

Certifications

Packaging & Shipping

FAQ

 

Q1. Are you a manufacturer?
Yes, we have mainly produced rubber conveyor belts for over 18 years.

Q2. What are your main products?
Multi-ply fabric conveyor belts (EP/NN type), steel cord conveyor belts, chevron conveyor belts, sidewall belts, white conveyor belts, bucket elevator belts, filter belts, and special conveyor belts with the characteristics of heat-resistant, cold-resistant, oil-resistant, flame retardant, abrasion resistant, etc.

Q3. What about the lead time?
1) 3--5 days for sample.
2) 20--25 days for mass production. If urgent, we have the green channel.

Q4. Can you send free samples?
Yes, we provide samples for free after inquiry.

Q5. How about the package?
Standard export packing method, your special requirement will be respected.

Q6. What are your Payment terms?
T/T or L/C.

Q7. Can you do door-to-door?
No problem.

Q8. How do you ensure your product quality?
Our quality control system had been ISO9001 certified. The first-class production equipment, testing facilities, and a complete quality assurance system guarantee high quality.

Q9. What is your major market?
Our products are heavily involved in exporting all over the world, including Europe, America, the Middle East, Southeast Asia, South Africa, Australia, etc.

Q10. What you can do to support me better?
We can provide products that meet quality standards, timely delivery, transportation packaging requirements, and customers' other special requirements.