| Customization: | Available |
|---|---|
| Type: | Ep625/5 |
| Material: | Rubber |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Structure
Main Technical Parameters
Type |
Textile type |
Strength per ply Min.(N/mm) |
Plies of fabric | Cover thickness(mm) | Belt width (mm) |
Cover grade | |
| Top cover | Bottom cover | ||||||
EP belt |
EP-100 | 100 | 2-8 | 2-16 |
0-10 |
300-3400 |
Abrasion resistant Impact resistant Heat resistant Oil resistant Acid/alkali resistant Fire resistant Etc. |
| EP-125 | 125 | ||||||
| EP-150 | 150 | ||||||
| EP-200 | 200 | ||||||
| EP-250 | 250 | ||||||
| EP-300 | 300 | ||||||
| EP-350 | 350 | ||||||
| EP-400 | 400 | ||||||
| EP-500 | 500 | ||||||
| NN belt | NN-100 | 100 |
2-10
|
||||
| NN-125 | 125 | ||||||
| NN-150 | 150 | ||||||
| NN-200 | 200 | ||||||
| NN-250 | 250 | ||||||
| NN-300 | 300 | ||||||
| NN-400 | 400 | ||||||
| NN-500 | 500 | ||||||
| CC belt | CC56 | 56 | 3-12 | ||||
This section outlines a comprehensive analysis of the main technical indexes, adhering to GB/T 7984-2013 standards, ensuring consistency and reliability for all users.
| Item | Type | ||||
| NN,EP,CC | |||||
| Adhesion strength | Between coating and belt cores | Thickness of coating layer>1.5mm ≥ N/mm |
3.5 | ||
| Thickness of coating layer 0.8~1.5mm More than N/mm |
3.2 | ||||
| Between layers ≥ N/mm | 4.5 | ||||
| Tensile strength value of full thickness belt / N / mm | 160 ~ 3150 | ||||
| Elongation of longitudinal reference force of full thickness belt / % ≤ | 4 | ||||
|
Coating performance
|
H (sharp wear) |
D (high wear) |
L (moderate wear) |
||
| Breaking strength / MPa ≥ | 24 | 18 | 15 | ||
| Elongation at break / % ≥ | 450 | 400 | 350 | ||
| Abrasion / mm3 ≤ |
120 | 100 | 200 | ||
| Aging test(70ºC×168h) Median value of tensile strength and elongation |
It shall not be less than 75% of the corresponding value before aging. |
||||
Raw Material Preparation - Select and process raw materials, including natural rubber, synthetic rubber, fabric (EP, NN, or steel cord), and chemical additives.
Mixing & Compounding - Blend rubber with reinforcing agents, vulcanizing agents, and other chemicals to achieve the desired properties.
Calendering - Process the rubber into thin sheets and embed fabric reinforcement layers (EP, NN, or steel cord) to enhance strength and flexibility.
Forming & Layer Assembly - Stack multiple layers of rubber and reinforcement materials together to achieve the required belt structure.
Vulcanization (Curing Process) - Apply heat and pressure in a vulcanization press to bond all layers, ensuring durability and flexibility.
Edge Trimming & Cutting - Cut the belt to the required width and trim excess edges for a clean finish.
Surface Treatment - Apply special coatings if needed, such as flame-retardant, oil-resistant, or anti-static treatments.
Quality Inspection & Testing - Perform tensile strength, abrasion resistance, elongation, and other tests to ensure the belt meets industry standards.
Endless Jointing (Optional) - If required, process the belt into an endless loop using hot vulcanization or mechanical joints.
Packaging & Delivery - Roll, pack, and ship the finished conveyor belts to customers for industrial applications.
Q1. Are you a manufacturer?
Yes, we have mainly produced rubber conveyor belts for over 18 years.
Q2. What are your main products?
Multi-ply fabric conveyor belt(EP/NN type), steel cord conveyor belt, chevron conveyor belt, sidewall belt, white conveyor belt, bucket elevator belt, filter belt, and special conveyor belts with the characteristics of heat resistant, cold resistant, oil resistant, flame retardant, abrasion resistant, etc.
Q3. What about the lead time?
1) 3--5 days for sample.
2) 20--25 days for mass production. If urgent, we have the green channel.
Q4. Can you send free samples?
Yes, we provide samples for free after inquiry.
Q5. How about the package?
Standard export packing method, your special requirement will be respected.
Q6. What are your Payment terms?
T/T or L/C.
Q7. Can you do door-to-door?
No problem.
Q8. How do you ensure your product quality?
Our quality control system had been ISO9001 certified. The first-class production equipment, testing facilities, and a complete quality assurance system guarantee high quality.
Q9. What is your major market?
Our products are heavily involved in exporting all over the world, including Europe, America, the Middle East, Southeast Asia, South Africa, Australia, etc.
Q10. What you can do to support me better?
We can provide products that meet quality standards, timely delivery, transportation packaging requirements, and customers' other special requirements.
){kind=link}